HYDROSPLICE™
Hydrosplice™ GT Splice Kit
PRODUCT DETAILS
Our Hydrosplice™ GT water meter splice kit is simple, mess-free, and waterproof. Connect your water meters to your radio-read meter network with a waterproof seal.
Features
- Field-installable in less than 1 minute
- 100% watertight gel seal
- Wax-free, no stripping wires or pouring liquid epoxy
- Standard European punch-down block, 22-24 AWG wires
- Properly set and cut wires when using impact punch-down tool
- Made in the U.S.A.
Splice Kit body
|
Upper and Lower Shells
|
RoHS-compliant Polypropylene
|
|
Properietary Waterproof Gel
|
Pre-installed, Self-healing
|
|
Operating Temperature
|
-40°F to +158°F
|
Punch-down block
|
Compliance
|
Compliance: Type approved against TEC, CT Block spec. GR/CTN03/03 March 04
|
|
Plastics
|
Plastics: PBT, Resistant against agressive chemicals (PVC Softener)
|
|
Plastics Flammability Class
|
Plastics Flammability Class: UL 94 V0
|
|
Contact
|
Contact: Special Brass, Silver Plated
|
|
Wire Guage
|
AWG 22 TO AWG 24 Stranded or Solid
|
|
1 Wire Per Contact
|
0.63 to 0.83 mm
|
|
2 Wire Per Contact
|
0.40 to 0.63 mm
|
|
Insulation Diameter of Connectable Wires
|
0.7 to 1.6 mm
|
|
Contact Resistance
|
< 2.5m ohms
|
|
Insulation Resistance
|
>50 Meg ohms
|
|
Dielectric Strength
|
2 KV rms
|
|
Impulse Current
|
5kA(8/20micro sec)
|
|
Current Carrying Capacity
|
2 A
|
Resources
